LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2017 >> Yaris iA Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake Control System (Service Information) >> FRONT SPEED SENSOR (Vehicle Stability Control) >> Removal >> Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

FRONT SPEED SENSOR (Vehicle Stability Control): Removal: Procedure

  1. CONNECTOR DISCONNECTION NOTE 
    1. Peel back the mudguard and disconnect the connector.

      Refer to REMOVAL

  2. REMOVE FRONT SPEED SENSOR 
    1. Remove the connector.

      See step  1

      GTY489292Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Connector *2 Bolt
      *3 Front Speed Sensor - -
      *a Front Speed Sensor Type A *b Front Speed Sensor Type B
      *c Marking *d Remove Clip While Pressing Arrow Indication.
      *e Body *f Clip
      *g Front Shock Absorber - -
      N*m (kgf*cm, ft.*lbf): Specified torque - -
    2. Remove the clip.
    3. Remove the bolt.
    4. Remove the front speed sensor.
scientia non olet · About LEMON Manuals