LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2019 >> Camry SE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (A25A-FKS) - Service Information (Except Hybrid) >> Knock Sensor >> Removal [03/2017 - 06/2017] >> Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal [03/2017 - 06/2017]: Procedure

  1. REMOVE GENERATOR ASSEMBLY 

    Refer to REMOVAL [03/2017 - 06/2017]

  2. REMOVE KNOCK CONTROL SENSOR 
    1. Disconnect the knock control sensor connector.
      GTY754296Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and knock control sensor from the cylinder block sub-assembly.
      NOTE:

      If the knock control sensor has been struck or dropped, replace it.

scientia non olet · About LEMON Manuals