DTC P0D38-28: Hybrid/EV Battery Charger Input Current Sensor Circuit Signal Bias Level Out of Range / Zero Adjustment Failure [09/2016 - ]: Description
The charge control ECU built into the electric vehicle charger assembly monitors the input alternating current using the IAC sensor. If it detects an IAC sensor malfunction, it stores a DTC. If these DTCs are output, replace the electric vehicle charger assembly.
Refer to the description for DTC P0D38-12.
Refer to DESCRIPTION
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate |
|---|---|---|---|---|---|
| P0D38-28 | Hybrid/EV Battery Charger Input Current Sensor Circuit Signal Bias Level Out of Range / Zero Adjustment Failure | When the electric vehicle charger assembly is off, IAC current flows. (1 trip detection logic) |
Electric vehicle charger assembly | Comes on | Master Warning Light: Comes on |