DTC P1C10-28: Current Sensor after Boosting by PFC Boosting Circuit Signal Bias Level Out of Range / Zero Adjustment Failure [09/2016 - ]: Description
The charge control ECU built into the electric vehicle charger assembly monitors the direct current using the IVH sensor. If it detects an IVH sensor malfunction, it stores a DTC. If these DTCs are output, replace the electric vehicle charger assembly.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate |
|---|---|---|---|---|---|
| P1C10-28 | Current Sensor after Boosting by PFC Boosting Circuit Signal Bias Level Out of Range / Zero Adjustment Failure | When VH-DCDC is not operating, IVH current flows. (1 trip detection logic) |
Electric vehicle charger assembly | Comes on | Master Warning Light: Comes on |