LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2020 >> Tacoma TRD Pro, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (2GR-FKS) - Service Information >> Accelerator Pedal >> Removal [08/2015 - ] >> Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal [08/2015 - ]: Procedure

  1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY 
    NOTE:

    This accelerator pedal sensor assembly does not require lubrication. Do not apply oil or other lubrication to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.

    1. Disconnect the connector from the accelerator pedal sensor assembly.
      GTY710050Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts and accelerator pedal sensor assembly from the vehicle body.
scientia non olet · About LEMON Manuals