LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2021 >> Prius LE AWD-e >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel System - Service Information >> Fuel Pressure Regulator >> Installation [12/2018 - ] >> Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation [12/2018 - ]: Procedure

  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY 
    1. Apply gasoline to 2 new O-rings. Then install the O-rings to the fuel pressure regulator assembly.
    2. Install the fuel pressure regulator assembly to the fuel suction tube with pump and gauge assembly.
      NOTE:

      Make sure that the O-rings are not cut or pinched during installation.

    3. Engage the 2 claws to install the fuel pressure regulator holder to the fuel suction tube with pump and gauge assembly.
  2. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY 

    Refer to INSTALLATION [12/2018 - ] 

scientia non olet · About LEMON Manuals