Caution / Notice / Hint
- When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.
- When the forward recognition camera is replaced with a new one or the windshield glass is replaced or removed/installed, make sure to read Before Starting Adjustment, then perform optical axis alignment for the forward recognition camera and clear the vehicle control history for each system.
HINT:
Forward recognition camera axis alignment can be performed by using either One Time Recognition, Sequential Recognition or Driving Adjustment.
One Time Recognition: Refer to TARGET ADJUSTMENT (ONE TIME RECOGNITION) [12/2021 - ]
Sequential Recognition: Refer to TARGET ADJUSTMENT (SEQUENTIAL RECOGNITION) [12/2021 - ]
Driving Adjustment: Refer to DRIVING ADJUSTMENT [12/2021 - ]
- for HV Model:
Before replacing the hybrid vehicle control ECU assembly, refer to Registration.
w/ Smart Key System: Refer to REGISTRATION [12/2021 - ]
w/o Smart Key System: Refer to REGISTRATION [02/2019 - 10/2022] , or refer to REGISTRATION [10/2022 - ]
- for Gasoline Model:
Before replacing the ECM, refer to Registration.
w/ Smart Key System: Refer to REGISTRATION [12/2021 - ]
w/o Smart Key System: Refer to REGISTRATION [11/2018 - 10/2022] , or refer to REGISTRATION [10/2022 - ]