DTC U0322-51: Software Incompatibility with Body Control Module Not Programmed [11/2018 - 12/2021]: Procedure
- CHECK FOR DTC (HEALTH CHECK)
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Enter the following menus: System Select / Health Check.
- Check for DTCs.
OK
DTCs are not output by any system other than the front camera system (Front Recognition Camera) and dynamic radar cruise control system (Radar Cruise2).
Result
Proceed to OK NG
Result:
OK
REPLACE FORWARD RECOGNITION CAMERA. Refer to REMOVAL [11/2018 - 12/2021]
Result:
NG
GO TO DIAGNOSTIC TROUBLE CODE CHART [11/2018 - 06/2020] , or DIAGNOSTIC TROUBLE CODE CHART [08/2020 - 12/2021]