DTC U0101: Lost Communication with TCM; DTC U0120: Lost Communication With Starter / Generator Control Module; DTC U0126: Lost Communication with Steering Angle Sensor Module; DTC U0129: Lost Communication with Brake System Control Module; DTC U0151: Lost Communication with Restraints Control Module; DTC U0155: Lost Communication with Instrument Panel Cluster (IPC) Control Module; DTC U0163: Lost Communication with Navigation Control Module; DTC U0164: Lost Communication with HVAC Control Module; DTC U0208: Lost Communication with "Seat Control Module A"; DTC U0230: Lost Communication with Rear Gate Module; DTC U023A: Lost Communication With Image Processing Module "A"; DTC U0293: Lost Communication With Hybrid Powertrain Control Module; DTC U0327: Software Incompatibility with Vehicle Security Control Module; DTC U1106: Lost Communication with Electric Parking Brake Module; DTC U1117: Lost Communication with Accessory Gateway [02/2019 - 12/2021]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Main Body / Clear DTCs.
5. Clear the DTCs.

   Body Electrical > Main Body > Clear DTCs 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  2

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Wait 10 seconds or more.
4. Turn the Techstream on.
5. Enter the following menus: Body Electrical / Main Body / Trouble Codes.
6. Check for DTCs.

   Body Electrical > Main Body > Trouble Codes 

   OK

   DTCs are not output.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - ] 

Result: 

NG 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [02/2019 - ]