DTC U0125-87: Lost Communication with Multi-axis Acceleration Sensor Module Missing Message; DTC U0129-87: Lost Communication with Brake System Control Module Missing Message; DTC U0140-87: Lost Communication with Body Control Module Missing Message; DTC U0293-87: Lost Communication With Hybrid Powertrain Control Module Missing Message [02/2019 - 08/2020]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Front Recognition Camera (Front Lighting Control) / Clear DTCs.
5. Clear the DTCs.

   Body Electrical > Front Recognition Camera (Front Lighting Control) > Clear DTCs 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  2

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Wait 5 seconds or more.
4. Turn the Techstream on.
5. Enter the following menus: Body Electrical / Front Recognition Camera (Front Lighting Control) / Trouble Codes.
6. Check for DTCs.

   Body Electrical > Front Recognition Camera (Front Lighting Control) > Trouble Codes 

   OK

   DTCs are not output.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - ] 

Result: 

NG 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [02/2019 - ]