DTC U0100-87: Lost Communication with ECM/PCM "A" Missing Message; DTC U0126-87: Lost Communication with Steering Angle Sensor Module Missing Message; DTC U0129-87: Lost Communication with Brake System Control Module Missing Message; DTC U0131-87: Lost Communication with Power Steering Control Module Missing Message; DTC U0140-87: Lost Communication with Body Control Module Missing Message; DTC U0151-87: Lost Communication with Restraints Control Module Missing Message; DTC U0164-87: Lost Communication with HVAC Control Module Missing Message; DTC U023A-87: Lost Communication with Image Processing Module "A" Missing Message; DTC U1110-87: Lost Communication with Intuitive Parking Assist Module Missing Message [11/2018 - 10/2023]: Description

The engine stop and start ECU communicates with the SFI system, vehicle stability control system, power steering system, air conditioning system, airbag system and main body ECU (multiplex network body ECU) via CAN communication.

If there is a communication error between the engine stop and start ECU and any of the systems, the engine stop and start ECU stores DTCs and illuminates the stop and start cancel indicator except when there is a communication error with the meter / gauge system.

HINT: 

• When there is an open in the output side of the backup boost converter (built into the engine stop and start ECU), power to the system with the open is cut off. The engine stop and start ECU stores CAN communication DTCs for the system with the open and stop and start system DTC P323A-16.
• When the backup boost converter (built into the engine stop and start ECU) detects overcurrent in any of the circuits it supplies power to, it shuts off the circuit. The engine stop and start ECU stores CAN communication DTCs for the system which circuit was shut off and stores stop and start system DTC P323A-19.

  e.g.: When the backup boost converter (built into the engine stop and start ECU) detects overcurrent in the power source circuit of the power steering system and cuts off power supply, the engine stop and start ECU stores DTCs U0131-87 and P323A-19.