LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> VinFast >> 2023 >> VF9 Eco >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Modules >> Repair Procedures >> Advanced Driver Assistance System (ADAS) Module Removal And Installation/Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Advanced Driver Assistance System (ADAS) Module Removal And Installation/Replacement

Mobile Repair Possible:  Van/Car

Overview: 

Removal Procedure: 

  1. Disconnect the 12V battery negative terminal. Refer to 12V BATTERY NEGATIVE CABLE DISCONNECTION/CONNECTION
  2. Remove A-pillar lower trim panel on passenger side. Refer to A-PILLAR LOWER TRIM PANEL REMOVAL AND INSTALLATION/REPLACEMENT
  3. Remove Instrument Panel Under Tray (Passenger). Refer to INSTRUMENT PANEL UNDER TRAY REMOVAL AND INSTALLATION/REPLACEMENT (PASSENGER)
    G16025101Courtesy of VINFAST, LLC
  4. Unlock and disconnect 8 electrical connectors (1).
  5. Remove 2 bolts (2).

    Torque: 8 Nm 

    G16025102Courtesy of VINFAST, LLC
  6. Remove ADAS module (1) with mounting bracket in arrow direction.

Installation Procedure: 

  1. Installation is the reverse of removal procedure, noting the following.

    All fasteners must be tightened to torque specification! 

  2. Install A-pillar lower trim panel on passenger side. Refer to A-PILLAR LOWER TRIM PANEL REMOVAL AND INSTALLATION/REPLACEMENT
  3. Install Instrument Panel Linder Tray (Passenger). Refer to INSTRUMENT PANEL UNDER TRAY REMOVAL AND INSTALLATION/REPLACEMENT (PASSENGER)
  4. Reconnect the 12V battery negative terminal. Refer to 12V BATTERY NEGATIVE CABLE DISCONNECTION/CONNECTION
  5. Diagnostics, Programming and Setup. Refer to DIAGNOSTICS, PROGRAMMING AND SETUP USING SCAN TOOL IN SERVICE
scientia non olet · About LEMON Manuals