LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 1981 >> Rabbit Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> Maintenance >> Procedures >> Wheel Alignment (Procedures) >> VOLKSWAGEN >> Adjustment >> Camber >> Dasher (Front)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Dasher (Front)

If camber is not within specifications, loosen nuts attaching ball joint to track control arm. To adjust, insert adjusting tool (40-200) in adjusting holes in control arm and pry ball joint sideways until camber is set to specifications. Tighten attaching nuts and recheck camber. Camber should not vary more than 1° between right and left sides.

NOTE: Insert tool from front on right side and from rear on left side.
scientia non olet · About LEMON Manuals