October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Vanagon (Front)

Set steering gear to center position by counting number of turns. Lug nut on rubber washer of pinion shaft must be aligned with notch in steering gear housing.
Loosen jam nuts and rotate both tie rods equal amounts until toe-in specifications are obtained. Tighten jam nuts.
Steering wheel must be centered on steering shaft and dust boots must not be twisted on tie rods. If steering wheel is not in center position, remove and center on splines.