LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 1988 >> GTI >> Repair and Diagnosis >> Engine Performance >> System >> DIGIFANT CEC System >> Testing >> Idle Stabilizer >> Regulation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Idle Stabilizer: Regulation

  1. Warm engine to normal operating temperature. Ensure all accessories are off. Inspect for leaks in intake air system. Check ignition timing, idle RPM and CO level. See TUNE-UP PROCEDURES section.
  2. Remove crankcase breather hose. Tightly pinch hose closed. Install Tester (VW 1315 A-1 ) and Adapter (VW 1315 A-2 ) on idle stabilizer. Operate engine at idle and note reading.
  3. Reading should be approximately 410-450 mA and fluctuate. Disconnect connector for oxygen sensor. Reading should be approxi-mately 430 mA with a constant reading. Replace idle stabilizer if readings are not within specification.
scientia non olet · About LEMON Manuals