Read Measuring Value Block, evaluating: Notes
| Display group 000 (decimal displayed value) | ||||||||||||
|
||||||||||||
| Read measured value block 0 | Indicated on display | |||||||||||
| x | x | x | x | x | x | x | x | x | x | |||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Display fields | Specified value | Corresponds to |
| Oxygen sensor control multiplicative learned value (part load range) | 116 - 140 | -10.0 - 10.0% | ||||||||||
| Oxygen sensor control additive learned value (idle speed range) | 112 - 144 | -3.0 - 3.0% | ||||||||||
| Oxygen sensor control value Bank 1 | 116 - 140 | -10.0 - 10.0% | ||||||||||
| Idle stabilization learned value | 103 - 153 | -4.9 - 4.9% | ||||||||||
| Idle regulation | 103 - 180 | -5.0 - 10.0% | ||||||||||
| Throttle valve angle | 0 - 13 | 0 - 5% | ||||||||||
| Motronic Engine Control Module (ECM) J220 supply voltage | 170 - 213 | 12.0 - 14.5 V | ||||||||||
| Engine speed (RPM) (idle speed) | 16 - 18 * See note | 680 - 720 RPM * See note | ||||||||||
| Engine load | --- | --- | ||||||||||
| Engine Coolant Temperature (ECT) | 185 - 205 | 85 - 105 ° C | ||||||||||
* Perform test drive when outside tolerances