Check Control Module Version

• Connecting scan tool. Refer to Scan tool, connecting , initiating On Board Diagnostic (OBD). Refer to Convenience system, initiating On Board Diagnostic (OBD)  .
• Switch on ignition.
• Press button -1- for "Rapid data transfer" mode.
• Switch on printer with Print button (warning lamp in button lights up).

• Press buttons -0- and -1-.

Indicated on display:

Rapid data transfer Q 01-Check Control Module Version

• Confirm entry with the -Q- button.

The control module identification of the Central control module for comfort system -J393- (Conv. cent. CU) will be shown on the V.A.G 1551 scan tool display, e.g.:

1J0959799J 03 Conv. cent. CU 0001 → Coding XXXXX WSC XXXXX

Breakdown of the display: 

Upper line	Part No. of control module system designation (032)Comf. cent. CU 0001)
Lower line	Code number dealer code number1)

1) Automatically stored in the control module when checking the system.

2) A number or number/letter combination (03 or 6Q, or others) indicate a correct programming of the control module.

• Press → button.

Will appear briefly in display:

Please wait

and then the following appears in the display:

The control module identification of the driver's door control module will be shown on the V.A.G 1551 scan tool display, e.g.:

1J0959801A 03 Door CU DS0022 →

• Press → button.

Will appear briefly in display:

Please wait

and then the following appears in the display:

The control module identification of the passenger's door control module will be shown on the V.A.G 1551 scan tool display, e.g.:

1J0959802B 03 Door CU PS0022 →

• Press → button.

Will appear briefly in display:

Please wait

and then the following appears in the display:

The control module identification of the rear left door control module will be shown on the V.A.G 1551 scan tool display, e.g.:

1J0959811A 03 Door CU RL0022 →

• Press → button.

Will appear briefly in display:

Please wait

and then the following appears in the display:

The control module identification of the rear right door control module will be shown on the V.A.G 1551 scan tool display, e.g.:

1J0959812A 03 Door CU RR0022 →

• Press → button.

Indicated on display:

Rapid data transfer HELP Select function XX

• Press buttons -0- and -6- to end the output.

Indicated on display:

Rapid data transfer Q 06 End output

• Confirm entry with the -Q- button.

Indicated on display:

Rapid data transfer HELP Enter address word XX

• Switch off ignition.
• Disconnect connector to V.A.G 1551 scan tool.