Diagnostic Trouble Code (DTC) Memory, Checking (Function 02): Notes

Select "02 - Check DTC Memory
NOTE: The displayed DTC information is updated only when initiating OBD or with "Erase DTC Memory" function 05.
If present, stored DTC data is displayed.
Select "Print" and then "Screen" from subsequent menu. Contents of VAS 5051 display screen are printed, for example "0 DTC detected)".
Should DTCs be indicated, refer to DTC table. See Diagnostic Trouble Code (DTC), Table .
Use VAS 5051 in mode "Guided Fault Finding" as necessary.
End Output. See END OUTPUT (FUNCTION 06) .