LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2002 >> GTI Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> 2.8L - Fuel Injection Ignition [BDF] - [01-On Board Diagnostic] >> 01 On Board Diagnostic (OBD) >> Measured value (data) blocks >> Measured value blocks, display groups 10...29 - Ignition, evaluating >> Evaluating display group 10, display zone 2 - Engine load
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Evaluating display group 10, display zone 2 - Engine load

Appears on display Possible cause Corrective action
Less than specified
  • Lower values can only occur when driving in overrun
---
Greater than specified
  • Rough idling (not running on all cylinders)
 
  • Mass Air Flow (MAF) Sensor G70 faulty
 
  • Fuel injector faulty
 
  • Throttle Valve Control Module J338 sticking/faulty
 
  • Electric consumers switched on
  • Switch off electric consumers
 
  • Steering wheel at full lock
  • Set steering wheel to center position
 
  • Gear selected (automatic transmission)
  • Place selector lever in P or N