Display group 56 - Speed control - Idling stabilization
| Display group 56 - Speed control - Idling stabilization | ||||||
|
||||||
| Read measured value block 56 | → | Indicated on display | ||||
| xxxx rpm | xxxx rpm | xx.x % | xxxxx | |||
| 1 | 2 | 3 | 4 | Display zones | Specification | Evaluation |
| Operating condition | xxxxx | Significance of figures in 5 digit number block, display zone 4 - Operating conditions | ||||
| Idling control | -5.0...10.0 % | --- | ||||
| Engine speed (specified idle speed) | 700 rpm | --- | ||||
| Engine speed (actual idle speed) | 640...720 rpm | Evaluating display group 1, display zone 1 - Engine speed (idle speed) | ||||
NOTE:
- Notes on display zones 1 and 2:
- The rpm in display zone 1 (measured revolutions) is the actual engine speed.
- The rpm in display zone 2 (specified rpm) is theoretical engine speed calculated by the Motronic Engine Control Module (ECM) J220. at idle, the Motronic Engine Control Module (ECM) J220 always tries to adapt the actual engine speed to the specified engine speed.