LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2002 >> GTI Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Ignition System >> 1.8L - Fuel Injection Ignition, Engine Code(S): AWW, AWP (A4 Platform) >> 01 On Board Diagnostic (OBD) >> Output Diagnostic Test Mode >> Output Diagnostic Test Mode (function 03), performing >> Test conditions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test conditions

Fig 1: Identifying Main Fuse Panel
GW00000097Courtesy of VOLKSWAGEN UNITED STATES, INC.
NOTE:
  • The Output Diagnostic Test Mode can only be carried out if the engine is stationary and ignition switched on.
  • The Output Diagnostic Test Mode will be broken off if the engine is started or a rotational impulse is recognized.
  • During the Output Diagnostic Test Mode the individual final controls will be activated until advancing to the next final control by pressing the → button.
  • The final controls are checked acoustically or by touching.
  • If it is necessary to repeat the Output Diagnostic Test Mode, without first running the engine briefly, switch the ignition off for approx. 2 seconds.
  • The electric fuel pump will run during the complete Output Diagnostic Test Mode.
  • The Output Diagnostic Test Mode will be aborted after 10 minutes.
scientia non olet · About LEMON Manuals