Display group 6 - Basic function
| Display group 6 - Basic function | ||||||
|
||||||
| Read measured value block 6 | → | Indicated on display | ||||
| xxxx rpm | xxx.x % | xxx.x ° C | xx.x % | |||
| 1 | 2 | 3 | 4 | Display zones | Specification | Evaluation |
| Elevation correction factor | -50.0...20.0 % | --- | ||||
| Intake air temperature | -37.0...126.0 ° C | Evaluating display group 4, display zone 4 - Intake air temperature (IAT) | ||||
| Engine load | 12.0...26.0 % | Evaluating display group 10, display zone 2 - Engine load | ||||
| Engine speed (idle speed) | 640...720 rpm | Evaluating display group 1, display zone 1 - Engine speed (idle speed) | ||||
NOTE:
- Note on display zone 2:
- The engine load at idling is given as the specification.
NOTE:
- Note on display zone 3:
- The total temperature range is given as the specification. The displayed value must be above ambient temperature.