LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2002 >> GTI Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> 2.8L - Fuel Injection Ignition [BDF] - [01-On Board Diagnostic] >> 01 On Board Diagnostic (OBD) >> Measured value (data) blocks >> Measured value blocks, display groups 30...33, 99 - Oxygen Sensor (O2S) control, evaluating >> Evaluating display group 36, display zone 2 - Diagnosis of Oxygen Sensor (O2S) after Three Way Catalytic Converter (TWC)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Evaluating display group 36, display zone 2 - Diagnosis of Oxygen Sensor (O2S) after Three Way Catalytic Converter (TWC)

Appears on display Possible cause Corrective action
Oxygen Sensor (O2S) after Three Way Catalytic Converter (TWC) not OK.: "B1 P2 n.OK.
  • DTC stored in DTC memory
 
  • Oxygen Sensor (O2S) after Three Way Catalytic Converter (TWC) faulty
  • Perform a road test to remove possible contaminates on Oxygen Sensor (O2S) and repeat check.
  • Perform diagnosis again if result is same: