Diagnostic Trouble Code (DTC) Memory, Checking (Function 02): Notes
NOTE:
The displayed DTC information is updated only when initiating OBD or with "Erase DTC Memory" function 05.
- Connect scan tool. See VAG 1551 SCAN TOOL (ST), CONNECTING, CHECKING CONTROL MODULE VERSIONS AND SELECTING FUNCTION .
- Switch printer on via the PRINT button (indicator lamp in button lights up). Indicated on display:
- Rapid data transfer HELP
- Select function XX
- Press buttons -0- and -2- to select function 02 "Check DTC Memory". Indicated on display:
- Rapid data transfer Q
- 02 - Check DTC Memory
- Press -Q- button to confirm input. Indicated on display:
- X malfunctions recognized!
- Display indicates the number of stored malfunctions. The stored malfunctions are displayed and printed out in sequence. Check print-out against DTC table and repair malfunction. See Diagnostic Trouble Code (DTC) Table .
- If "No DTC recognized" is displayed, the program will return to the start position after the right arrow button is pressed. Indicated on display:
- Rapid data transfer HELP
- Select function XX
- If something else is displayed, check operating instructions for Scan Tool.
- End Output (function 06). See END OUTPUT (FUNCTION 06) .
- Switch off ignition and disconnect diagnostic connector.