Sensor Wheel (Engine RPM)

Crankshaft, removing and installing

Sensor Wheel (For Engine RPM) Installing

Install sensor wheel on crankshaft






Make sure the crankshaft /sensor wheel contact surface is free of oil and grease.
- For additional securing, thinly coat contact surface of crankshaft/sensor wheel with locking fluid "D6".
- First lightly tighten all new securing bolts by hand.
- Tighten securing bolt -1- to 10 Nm plus 1/4 rotation (90 °) additionally.
- Now tighten securing bolts -2- to 10 Nm and 1/4 rotation (90 °).