Test-ID 162 ($A2): Misfire Cylinder 1 Data
-- Connect the scan tool.
-- Start the engine and run at idle.
-- Select "Diagnostic Mode 06 - Check Test Results of Components that are not Continuously Monitored".
Select "Test-ID 162 ($A2)".
-- Select the desired "Test-ID (TID)" or "Hex-ID".
-- Check specified values at idle.
| Test-ID (TID) (Hex-ID) | DTC | Component or System | Min./Max. Values | Additional Information | |
|---|---|---|---|---|---|
| 11 ($0B) | -- | Combustion Misfire Cylinder 1 average over 10 driving cycles. For additional information, refer to the Bosch Motronic MED 9.1 OBD System Strategy. | 0 - 65535 (counts) | -- | |
| 12 ($0C) | -- | Combustion Misfire Cylinder 1 in this driving cycle. For additional information, refer to the Bosch Motronic MED 9.1 OBD System Strategy. | 0 - 65535 (counts) | -- | |
-- If any of components or systems fail to meet the specified values. Refer to DIAGNOSTIC MODE 03 - READ DTC MEMORY to check for stored DTC's or the corresponding diagnostic repair procedure.
-- Switch the ignition off.
End diagnosis.