Test-ID 59 ($3B): Fuel Tank EVAP System Integrity/Leak Test (0.40/1.0mm)
-- Connect the scan tool.
-- Start the engine and run at idle.
-- Select "Diagnostic Mode 06 - Check Test Results of Components that are not Continuously Monitored".
Select "Test-ID 59 ($3B)".
-- Select the desired "Test-ID (TID)" or "Hex-ID".
-- Check specified values at idle.
| Test-ID (TID) (Hex-ID) | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| 129 ($81) | P0442 | Fuel Tank Leak Test. For additional information, refer to the Bosch Motronic MED 9.1 OBD System Strategy. | --- | 1.9 5 - 2.15 Seconds | Refer to DTC P0442 in the SAE P0XXX DIAGNOSTIC TROUBLE CODES . |
| 130 ($82) | P2403 | LDP test : Reed contact closed. For additional information, refer to the Bosch Motronic MED 9.1 OBD System Strategy. | 0 | 1.0 sec | Refer to DTC P2403 in the SAE P2XXX DIAGNOSTIC TROUBLE CODES |
| 131 ($83) | P2404 | LDP test: Reed contact open. For additional information, refer to the Bosch Motronic MED 9.1 OBD System Strategy. | 0 | 25 counts | Refer to DTC P2404 in the SAE P2XXX DIAGNOSTIC TROUBLE CODES |
| 132 ($84) | P2403 | LDP test: Reed contact closed after initial/continuation flushing. For additional information, refer to the Bosch Motronic MED 9.1 OBD System Strategy. | 6.4 g | 65535 | Refer to DTC P2403 in the SAE P2XXX DIAGNOSTIC TROUBLE CODES |
-- If any of components or systems fail to meet the specified values. Refer to DIAGNOSTIC MODE 03 - READ DTC MEMORY to check for stored DTC's or the corresponding diagnostic repair procedure.
-- Switch the ignition off.
End diagnosis.