$3A (58): Fuel Tank EVAP System Leak Test (0.090")
-- Connect the scan tool.
-- Start the engine and let run at idle speed.
-- Select "Diagnostic Mode 06 - Check Test Results of Components that are not Continuously Monitored ".
Select "Test-ID 59 ($3B)".
-- Select the desired "Test-ID".
-- Check specified values at idle.
| Test-ID (TID) (Hex-ID) | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| 129 ($81) | P0455 | Fuel Tank Leak Test (Large leak). For additional information, refer to the Bosch Motronic ME 7 OBD System Strategy. Page 17. | 850 - 1150 ms | 65535 ms | Refer to DTC P0455 in the DTC table SAE P0XXX DIAGNOSTIC TROUBLE CODES . |
-- If any component or system fails to meet the specified values, refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTC's or the corresponding diagnostic repair procedure.
-- Switch the ignition off.
-- End of diagnosis.