Display group 002, evaluating

Display field	Description	Display	Corrective action
1	Cruise control system "SET -"	not oper. = not operating SET - = operating button "SET -"	- Perform visual check of wiring and connections Check wiring and connections of affected circuit for correct connection and tight fit while simultaneously observing display. If display does not change after checking connections, troubleshoot wiring using wiring diagram Replace relevant component, if necessary. Erase DTC memory. Perform functional check Check DTC memory again.
2	Cruise control system "RES+"	not oper. = not operating RES+ = operating button "RES+"
3	Cruise control system "CANCEL"	not oper. = not operating OFF = operating button "CANCEL"
4		Empty

If the displayed values in all display zones are OK:

NOTE: Check DTC Memory after completing the function "Read Measuring Value Block". Refer to Diagnostic Trouble Code (DTC) memory, checking (function 02) .