Code Control Module (function 07): Notes
Use this function to code the Multi-function Steering Wheel (MSW) electronics.
Coding
- Connect VAG 1551 Scan Tool (ST), input address word 16 "Steering wheel electronics"
| 1J0907487 Steering wheel electron.x28 → Coding 00008 WSC 00000 |
Indicated on display (example only):
NOTE:
Control module coding depends on the part number of the control module installed. Make note of the control module part number when displayed by the Scan Tool.
- Press → button
| Rapid data transfer HELP Select function XX |
Indicated on display (select function):
- Press buttons -0- and -7- to select "Code control module" function 07".
- Press -Q- button to confirm input.
- Indicated on display:
- Refer to control module part number noted earlier, and check/enter applicable code number from code tables. Refer to Code tables .