Test-ID 61 (3D): Purge Flow Monitor
-- Connect the scan tool.
-- Start the engine and let run at idle speed.
-- Select "Diagnostic Mode 06 - Check Test Results of Components that are not Continuously Monitored ".
Select "Test-ID 61 ($3D)".
-- Select the desired "Test-ID".
-- Check specified values at idle.
| Test-ID (TID) (Hex-ID) | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| 128 ($80) | P0441 | Function Check. For additional information, refer to the Bosch Motronic ME 7.1.1 OBD System Strategy. | 0.25 | 2 | Refer to DTC P0441 in the SAE P0XXX DIAGNOSTIC TROUBLE CODES . |
| 130 ($82) | - | Function Check. For additional information, refer to the Bosch Motronic ME 7.1.1 OBD System Strategy. | 0.05 | -0.05 | - |
| 131 ($83) | - | Function Check. For additional information, refer to the Bosch Motronic ME 7.1.1 OBD System Strategy. | 0.15 | 1 | - |
| 133 ($85) | - | Tank ventilation valve check off %. Active test Air balance at idle. For additional information, refer to the Bosch Motronic ME 7.1.1 OBD System Strategy. | 0 ms | 1300 ms | - |
-- If any of components or systems fail to meet the specified values. Refer to DIAGNOSTIC MODE 03 - READ DTC MEMORY to check for stored DTC's or the corresponding diagnostic repair procedure.
-- Switch the ignition off.
End of Diagnosis