Comfort System Central Control Module -J393- OUTPUT DIAGNOSTIC TEST MODE

NOTE:

It depends on the vehicle equipment whether the components and functions listed below can be checked.

The following components and functions can be checked via output Diagnostic Test Mode (DTM) of Comfort System Central Control Module -J393- :

Left Rear Entry Lamp -W33-
Left Rear Central Locking Lock Unit -F222- (central locking of left rear door is activated)
Right Rear Entry Lamp -W34-
Right Rear Central Locking Lock Unit -F223- (right rear door central locking is activated)
Tank flap activation (tank flap is opened)
Rear lid activation (rear lid is opened)
Vehicle Inclination Sensor Indicator Lamp -K188- (LED) in Interior Monitoring Deactivation Switch -E267-
Interior Monitoring -Off- Indicator Lamp -K162- (LED) in Vehicle Inclination Sensor Deactivation Button -E360-
Alarm Horn -H12-

-- Connect the Vehicle Diagnostic Tester, refer to VEHICLE DIAGNOSIS, TESTING AND INFORMATION SYSTEMS .

-- On the Vehicle Diagnostic Tester, select "Guided Fault Finding".

-- Using the "GO TO" button, select "Functions/Component selection" and the following menu options in sequence: