LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2012 >> Passat 3.6 SE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> 3.6L - Generic Scan Tool - Engine Code: CDVB (1 Of 2) >> St Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Modes 01 - 09 >> Diagnostic Mode 07 - Read Faults Detected During The Current Or Last Driving Cycle >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Mode 07 - Read Faults Detected During The Current Or Last Driving Cycle: Procedure

-- Connect the scan tool.

-- Start the engine and run at idle.

NOTE:

If the engine does not start, crank the engine using starter for at least 5 seconds. Do not switch the ignition off afterward.

-- Select Mode 7: Check test results of components that are continuously monitored.

The number of pending DTCs or 0 malfunctions detected will be displayed on the scan tool screen.

-- Refer to the DTC tables for the diagnostic repair procedures.

-- Switch the ignition OFF.

scientia non olet · About LEMON Manuals