Diagnostic Mode 09 - Read Vehicle Information: Procedure

-- Connect the scan tool.

-- Switch the ignition ON.

-- Select Mode 09: Vehicle information.

-- Select the desired Test-ID.

-- The information requested will be displayed on the scan tool screen.

The following table is a numerical list of all Test-IDs that may be selected.

Test-ID	Diagnostic text
02:	Vehicle identification number e.g.
-	A different 17 digit number will be displayed for each vehicle
04:	Calibration identification e.g.
-	Engine Control Module (ECM) --
-	Transmission Control Module (TCM) --
06:	CVN (check sum) e.g.
-	EC5AE460 the check sum is different for every control module version
-	000D105

-- Switch the ignition OFF.