Checking Activation
-- Remove the v. Refer to appropriate service information.
-- Using a Multimeter, Check the Fuel Pressure Sensor -G247- electrical harness connector to the Motronic Engine Control Module - J623 - electrical harness connector T60 for an open circuit.
| Fuel Pressure Sensor -G247- electrical harness connector terminals | Engine Control Module - J623- electrical harness connector T60 terminals. |
|---|---|
| 2 | 55 |
Specified value: 1.5 Ω Max.
If the specified value was Not obtained:
-- Check the wiring connection for an open circuit, short circuit to Battery positive or Ground
-- Check the wiring connection for damage, corrosion, loose or broken terminals.
-- If necessary, repair the faulty wiring connection.
-- Go to Final Procedures
If the specified value was obtained:
-- Replace the Fuel Pressure Sensor -G247-. Refer to appropriate service information.