Overview - Display And Control Unit, Electric Manual Climate Control System From 06/25/2011
NOTE:
An indicator lamp inside the controls indicates when the selected function is on.
If the lamp in the AC button does not come after the button is pushed, there may be a fault in the control module. Call up the DTC memory using the Vehicle Diagnostic Tester. If the fault stored in the DTC memory "A/C compressor first start not performed" is present, then is it necessary to perform a basic setting and an adaptation "A/C compressor first start" either in Guided Fault Finding or in Guided Functions.
Note the vehicles with a Start/Stop System. Refer to START/STOP SYSTEM .
- Left Seat Heating Button -E653-
- Optional
- The seat heating as 3 settings. An LED indicates which setting is selected.
- If no LED is illuminated, the seat heater is switched off.
- A/C
Button
- The A/C compressor is set to almost 0 delivery when the AC button is off.
- Rear Window Defogger Button
- Rear window defroster remains on for 4 to 20 minutes, depending on exterior temperature.
- Recirculation Mode ButtonNOTE:
The recirculating air mode turns off during ignition and returns to fresh air mode.
- Immediate Heating Button -- for Parking/Auxiliary Heater ON/OFF or OFF Button for Heating and Air Conditioning ON/OFF
- Depending on the equipment level
- OFF button is pressed, the A/C does not work. There is no heating or ventilation.
- Right Seat Heating Button -E654-
- Optional
- The seat heating as 3 settings. An LED indicates which setting is selected.
- If no LED is illuminated, the seat heater is switched off.
- Air Distribution Control
- Air Distribution Display
- Blower Speed Control
- To the left: decreases the blower speed
- To the right: increases the blower speed
- Blower Speed Display
- Temperature Control
- To the left: lower the temperature
- To the right: increases the temperature
- Temperature Setting Display