Monitor-ID $B2: Particulate Matter Trap Efficiency
-- Connect the scan tool.
-- Start the engine and run at idle.
-- Select "Mode 6: Check test the results of components that are not continuously monitored".
Select "Monitor-ID A5".
-- Select the desired "Test-ID".
-- Check specified values at idle.
| Test-ID | DTC | Component or System | Min./Max. Values | Additional Information | |
|---|---|---|---|---|---|
| $C0 | P2002 | Particulate matter trap efficiency. | 0 - 0 | Refer to DTC P2002 in the DTC summary table. | |
| $C2 | P2002 | Particulate matter trap missing. | .80 kPa - 655.35 kPa | Refer to DTC P2002 in the DTC summary table. | |
| $C4 | P2458 | No Complete PM Regeneration | --- | Refer to DTC P2458 in the DTC summary table. | |
| $C5 | P2459 | Frequency PM Regeneration | --- | Refer to DTC P2459 in the DTC summary table. | |
| $CA | P2478 | Exhaust temperature control loop (upstream turbine temperature). Control deviation Max. | -3276.8 °C to 175 °C | Refer to DTC P2478 in the DTC summary table. | |
| $CB | P2478 | Exhaust temperature control loop (upstream turbine temperature). Control deviation Min. | -154.5 °C to 3276.7 °C | Refer to DTC P2478 in the DTC summary table. | |
| $CD | P247A | Exhaust temperature control loop (upstream particulate matter trap temperature). Control deviation Max. | -3276.8 °C to 153.8 °C | Refer to DTC P247A in the DTC summary table. | |
| $CE | P247A | Exhaust temperature control loop (upstream particulate matter trap temperature). Control deviation Min. | -996.2 °C to 3276.7 °C | Refer to DTC P247A in the DTC summary table. | |
| $D0 | P2002 | Particulate matter trap efficiency. | 4.60 kPa - 655.35 kPa | Refer to DTC P2002 in the DTC summary table. | |
| $D1 | P2002 | Particulate matter trap missing over delta pressure | --- | Refer to DTC P2002 in the DTC summary table. | |
| $D2 | P2002 | Particulate matter trap missing over temperature gradient | --- | Refer to DTC P2002 in the DTC summary table. | |
| $D3 | P2002 | Particulate matter trap efficiency over delta pressure | --- | Refer to DTC P2002 in the DTC summary table. | |
| $D4 | P2002 | Particulate matter trap efficiency over soot simulation | --- | Refer to DTC P2002 in the DTC summary table. | |
-- Switch the ignition Off.
-- If any of the components or systems fail to meet the specified values, refer to Diagnostic Mode 03: Interrogating Fault Memory to check for stored DTCs or the corresponding diagnostic repair procedure.
-- Switch the ignition off.