Monitor-ID $3B: Fuel Tank EVAP System Integrity/Leak Test (0.40/1.0mm)
-- Connect the scan tool.
-- Start the engine and run at idle.
-- Select "Mode 6: Check test the results of components that are not continuously monitored".
Select "Monitor-ID 3B".
-- Select the desired "Test-ID".
-- Check specified values at idle.
| Test-ID | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| $81 | P0442 | Fuel Tank Leak Test: Small leak. | 1.550 s | 65.535 Sec | Refer to DTC P0442 the DTC summary table. Engine Control Module --, 2010-2014 MY |
| $86 | P0442 | Fuel Tank Leak Test: Small leak. | 900 Pa | 8191.75 Pa | Refer to DTC P0442 the DTC summary table. Engine Control Module --, 2010-2014 MY |
-- If any of components or systems fail to meet the specified values. Refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTC's or the corresponding diagnostic repair procedure DIAGNOSTIC MODE 03 - READ DTC MEMORY .
-- Switch the ignition off.