| 1 |
- PERFORM: Preliminary Check to verify the customers concern. Refer to PRELIMINARY CHECK
-- Was concern verified? |
-- YES:
-- NO:
- Gather more Information from customer about the concern.
|
| 2 |
- IGNITION: OFF
- DISCONNECT: Outside Air Temperature Sensor -G17- electrical connector
- CHECK: Outside Air Temperature Sensor -G17- terminals 1 to 2 for resistance.
- SPECIFIED VALUE: 1300 Ω (+/- 500 Ω @ approx. 20° C)
-- Was value obtained? |
-- YES:
-- NO:
- REPLACE: Outside Air Temperature Sensor -G17-. Refer to appropriate repair information.
- GO TO: Step 4
|
| 3 |
- REMOVE: Vehicle Electrical System Control Module -J519-. Refer to appropriate repair information.
- CHECK: Outside Air Temperature Sensor -G17- electrical connector terminals 1 to the Vehicle Electrical System Control Module -J519- electrical connector terminals T32a / 25.
- CHECK: Outside Air Temperature Sensor -G17- electrical connector terminals 2 to the Vehicle Electrical System Control Module -J519- electrical connector terminals T32a / 10.
- SPECIFIED VALUE: 0.5 Ω (± 0.3 Ω)
-- Was value obtained? |
-- YES:
- REPLACE Vehicle Electrical System Control Module -J519- Refer to appropriate repair information
- GO TO: Step 4
-- NO:
- CHECK: wiring for open, high resistance, short or electrical connector for damage, corrosion, loose or broken terminals
- REPAIR: faulty wiring or connector
- GO TO: Step 4
|
| 4 |
- Final Procedure
- Perform a road test to verify repair.
- Do any DTC's return:
|
-- YES:
-- NO:
- Repair is complete, Generate readiness code. Refer to READINESS CODE
- Return vehicle to Customer
|