Anti-Theft Coding, Deactivating

-- Turn on the RNS.

"SAFE" appears in the display for approximately 10 seconds, after that "1000" appears.

-- Enter the correct anti-theft code using the keyboard on the input mask.

-- Press the input screen to confirm in the entry.

The RNS (Radio Navigation System) is enabled and ready for operation.

Use the correction screen to erase an incorrect code.

If an incorrect anti-theft code is entered, the code can be entered a second time. If anti-theft code is entered incorrectly twice, then the RNS (Radio Navigation System) is locked for an hour. Leave the RNS and ignition on. The procedure can be repeated after one hour.

Note: the anti-theft code can be entered two times. After that, the RNS locks up for one hour.