Compass, Calibrating

1. Bring up the Main Menu

-- Switch on the ignition.

An outline of a vehicle appears.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the button -1- in the windshield wiper lever one time.

-- To move back out of another menu into the main menu, hold the rocker switch -2- depressed for two seconds.

This procedure might have to be repeated until the main menu appears.

2. Bring up the Menu "Settings"

-- Press the top or the bottom of the rocker switch to highlight a point on the menu.

The marked menu item is located between the two horizontal lines. There is also a small triangle on the right side.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Highlight "settings".

-- Press the button -1- in the windshield wiper lever.

The menu "Settings" is brought up.

3. Bring up the Menu "Comfort"

-- Highlight "Comfort" with the rocker switch -2-.

The menu "Comfort" is brought up.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

4. Bring up the Menu "Compass"

-- Highlight "compass" with the rocker switch -2-.

The menu "Compass" is brought up.

The following will appear in "compass" :

1. Direction
2. Zone
3. Calibration
4. Back

5. Bring up the Menu "Calibration"

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Select >>calibration<< and press the button -1- to confirm.

The following will appear in "calibration" :

1. To calibrate, a full circle must be driven
2. Calibrating
3. Back

6. Bring up the Menu "Calibrating"

Select >>calibrate<< and press the button -1- to confirm.

The following will appear in "calibrate" :

1. Driving in a Full Circle

   Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the button -1-.

-- Drive in a full circle at a speed of less than 20 km/h (10 mph).

"CAL" is indicated at the top in the display, next to the arrow for direction.

After completing the calibration, the indication "CAL" is replaced by the actual direction (for example "N" for North).