Specifications Index

SPECIFICATIONS INDEX

System			Specification/Procedure
Air Conditioning
Service			WORKING WITH A/C SERVICE STATION (1 OF 2) and WORKING WITH A/C SERVICE STATION (2 OF 2)
Torque			A/C COMPRESSOR
Axle Nut/Hub Nut
Front			Pre-tighten the 12-point nut to 150 Nm Lower the vehicle onto its wheels. Tighten to 500 Nm.
Rear			Pre-tighten the 12-point nut to 150 Nm Lower the vehicle onto its wheels. Tighten to 500 Nm.
Battery			BATTERY
Brakes
Bleeding Sequence			BRAKE SYSTEM, BLEEDING
Disc Brakes
	Front		FRONT BRAKES
	Rear		REAR BRAKES
Torque			OVERVIEW - FRONT BRAKES, BREMBO 17" or OVERVIEW - FRONT BRAKES, BREMBO 18" OVERVIEW - REAR BRAKES, 17" BRAKE CALIPER
Charging
Generator			N/A
Torque			GENERATOR
Drive Belts
Adjustment
3.0L			RIBBED BELT, REMOVING AND INSTALLING Engine Code(s): CNRB RIBBED BELT, REMOVING AND INSTALLING Engine Code(s): CGFA
3.6L			RIBBED BELT, REMOVING AND INSTALLING
Belt Routing
		3.0L	See the figure under Installing Engine Code(s): CNRB See the figure under "Installation" in RIBBED BELT, REMOVING AND INSTALLING Engine Code(s): CGFA
	3.6L		See the figure under Installing
Engine Cooling
General Service Specifications			Refer to the approrpiate FLUID CAPACITY TABLES information.
Radiator Cap Pressure			1.4 to 1.6 bar (20.3 to 23.2 psi)
Thermostat R & I
3.0L			COOLANT THERMOSTAT, REMOVING AND INSTALLING Engine Code(s): CNRB COOLANT THERMOSTAT, REMOVING AND INSTALLING Engine Code(s): CGFA
	3.6L		COOLANT THERMOSTAT, REMOVING, INSTALLING AND CHECKING
Water Pump R & I
3.0L			COOLANT PUMP, REMOVING AND INSTALLING for Engine Code(s): CNRB COOLANT PUMP, REMOVING AND INSTALLING for Engine Code(s): CGFA
	3.6L		COOLANT PUMP, REMOVING AND INSTALLING
Engine Mechanical
3.0L
		Compression	COMPRESSION PRESSURE, CHECKING Engine Code(s): CNRB COMPRESSION, CHECKING Engine Code(s): CGFA
Oil Pressure			Engine Code(s): CNRB OIL PRESSURE, CHECKING Engine Code(s): CGFA OIL PRESSURE, CHECKING
Overhaul			Engine Code(s): CNRB 10 ENGINE ASSEMBLY 13 CRANKSHAFT, CYLINDER BLOCK 15 CYLINDER HEAD, VALVETRAIN Engine Code(s): CGFA 10 ENGINE ASSEMBLY 13 CRANKSHAFT, CYLINDER BLOCK 15 CYLINDER HEAD, VALVETRAIN
Torque			Refer to the appropriate procedure in 10 ENGINE ASSEMBLY , 13 CRANKSHAFT, CYLINDER BLOCK and 15 CYLINDER HEAD, VALVETRAIN Engine Code(s): CNRB Refer to the appropriate procedure in 10 ENGINE ASSEMBLY , 13 CRANKSHAFT, CYLINDER BLOCK and 15 CYLINDER HEAD, VALVETRAIN Engine Code(s): CGFA
3.6L
		Compression	COMPRESSION PRESSURE, CHECKING
Oil Pressure			OIL PRESSURE AND OIL PRESSURE SWITCH, CHECKING
Overhaul			10 ENGINE ASSEMBLY 13 CRANKSHAFT, CYLINDER BLOCK 15 CYLINDER HEAD, VALVETRAIN
Torque			Refer to the appropriate procedure in 10 ENGINE ASSEMBLY , 13 CRANKSHAFT, CYLINDER BLOCK and 15 CYLINDER HEAD, VALVETRAIN
Fluid Specifications			See FLUIDS under MAINTENANCE tab.
Engine Oil Drain Plug			30Nm
Flywheel/Flex Plate Torque
3.0L Engine Code(s): CNRB			60 Nm + 90° (1/4) additional turn.
	3.0L Engine Code(s): CGFA		60 Nm + 90° (1/4) additional turn.
	3.6L Engine Code(s): CGRA		60 Nm + 90° (1/4) additional turn.
Fuel System
Fuel Pressure Test Procedure
	3.0L		FUEL PRESSURE, CHECKING Engine Code(s): CNRB FUEL PRESSURE, CHECKING Engine Code(s): CGFA
	3.6L		FUEL PRESSURE, CHECKING
Ignition
Firing Order & Cylinder Identification			FIRING ORDER & CYLINDER IDENTIFICATION
Ignition Wires (Resistance)			Coil-On-Plug
Ignition Wires (Routing)			Coil-On-Plug
Spark Plug/Glow Plug
3.0L			059 963 319 AB Engine Code(s): CNRB 101 905 611 G Engine Code(s): CGFA
3.6L			101 905 622
Starting
Starter			STARTER, VEHICLES WITH AUTOMATIC TRANSMISSION
Torque			3.0L OVERVIEW - STARTER Engine Code(s): CNRB OVERVIEW - STARTER Engine Code(s): CGFA 3.6L OVERVIEW - STARTER
Wheel Alignment
Adjustment Specifications			WHEEL ALIGNMENT
Torque			Refer to the appropriate procedure in: 40 FRONT SUSPENSION 42 REAR SUSPENSION
Wheel & Tire
Wheel Lug Nut Torque			132 Ft. Lbs (180 Nm)