Monitor-ID $3B: Fuel Tank EVAP System Integrity / Leak Test (0.040" / 1.0 mm)
-- Connect the scan tool.
-- Start the engine and run at idle.
-- Select "Diagnostic Mode 6: Check test the results of components that are not continuously monitored".
Select "Monitor-ID $3B".
-- Select the desired "Test-ID".
-- Check specified values at idle.
| Test-ID | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| $87 | P0442 | Rough Leak Long Cycle. | 15.003 - 50.003 mA | 255.996 mA | Refer to DTC P0442 in the DTC summary table. Engine Control Module --, 2017 MY - P0442 |
| $88 | P0442 | Rough Leak Short Cycle. | 15.003 - 50.003 mA | 255.996 mA | Refer to DTC P0442 in the DTC summary table. Engine Control Module --, 2017 MY - P0442 |
-- If any of components or systems fail to meet the specified values. Refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTC's or the corresponding diagnostic repair procedure DIAGNOSTIC MODE 03 - READ DTC MEMORY .
-- Switch the ignition off.