Monitor-ID $A3: Mis-Fire Cylinder 2 Data
-- Connect the scan tool.
-- Start the engine and run at idle.
-- Select "Diagnostic Mode 6 Check test the results of components that are not continuously monitored".
Select "Monitor-ID $A3".
-- Select the desired "Test-ID".
-- Check specified values at idle.
| Test-ID | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| $0B | P0302 | Cylinder 2 Data Averaged During Last 10 Driving Cycles, Only Indication (Pass). | 0.0 | 65, 535 | Refer to DTC P0302 in the DTC summary table.Engine Control Module --, 2017 MY - P0302 |
| $0C | P0302 | Cylinder 2 Data Current Driving Cycle, Only Indication (Pass). | 0.0 | 65, 535 | Refer to DTC P0302 in the DTC summary table.Engine Control Module --, 2017 MY - P0302 |
-- If any of components or systems fail to meet the specified values. Refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTC's or the corresponding diagnostic repair procedure DIAGNOSTIC MODE 03 - READ DTC MEMORY .
-- Switch the ignition off.