Transmission Fluid Level, Checking: Checking
-- Check the fluid level using the Vehicle Diagnostic Tester.
NOTE:
Let the transmission cool down if the fluid temperature is higher than 45 °C (113 °F).
The engine is idling and the selector lever is in "P".
-- Move the : SNM372500 under the transmission near the transmission fluid drain and check plug.
-- Remove the drain- and check plug -arrow-.
-- Always replace the seal for the drain plug -arrow-.
NOTE:
Even if the level of transmission fluid is too low, first a small amount of transmission fluid will flow out of the overflow tube, because it fills during operation.
-- Let the excess oil drain.
-- Install the drain plug with a new seal as soon as all the fluid has drained out (it starts to drip).
-- If no oil flows out, the oil must be filled.