Brake Line Tightening Sequence:

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the brake lines in the sequence -1 to 6-.

-- Tighten the brake lines in the sequence -1 to 6-.

-- Remove the :VAG1869/2  .

-- Bleed the brake system. Refer to HYDRAULIC SYSTEM, STANDARD BLEEDING .

-- Code the radio.

-- Code the ABS Control Module -J104-.Refer to Vehicle Diagnostic Tester in "Guided Fault Finding".

While doing so, a basic setting for the Steering Angle Sensor -G85-, ransverse Acceleration Sensor -G200-, ongitudinal Acceleration Sensor -G251- and Brake Pressure Sensor 1 -G201- must be performed.