LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2017 >> Jetta GLI, Standard Trans >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance System (General Information) >> Maintenance >> Procedure Descriptions >> Cooling System, Checking Freeze Protection And Coolant Level >> Freeze Protection, Checking And Adding Coolant Additive
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Freeze Protection, Checking And Adding Coolant Additive

Special Tools And Workshop Equipment Required 

NOTE:

Read the cut-off line to obtain an accurate value for the following tests. Place a drop of water on the glass using a pipette to improve the readability of the cut-off line. The cut-off line can be clearly recognized on the "WATERLINE".

-- Check the coolant additive concentration using the :T10007A  . (Pay attention to the service/repair/system information).

The refractometer scale -1- is designed for coolant additives G12; G12 Plus, G12 Plus Plus and G11.

GWWN01-11032Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The scale -2- only applies to coolant additive G13.

-- Drain some of the coolant and add coolant additive if the freeze protection is inadequate. Refer to COOLANT LEVEL, CHECKING AND ADDING COOLANT ADDITIVE .

NOTE:

If it cannot clearly determined which coolant additive is in the coolant system, use the scale -2- for coolant additive G13.

Please follow all waste disposal regulations!

-- Check the concentration of the coolant additive again after the road test.