Windshield Wiper Motor, Deactivating Alternating Park Position Function: Notes

The windshield wiper system is equipped with the APP function (alternating park position).

The APP function causes the wiper, after every second time it is switched off, to move up one level after reaching the lowest position.

To install the motor crank on the Windshield Wiper Motor -V-, it is necessary to shut off the Windshield Wiper Motor -V- in the lower park position. This is attained by deactivating the APP function.

Note the following: 

• An activation of APP function is not possible.
• APP function is automatically activated after 100 wiping cycles. This applies to Windshield Wiper Motors -V- in which the APP function was deactivated as well as new Windshield Wiper Motors -V-.