Freeze Protection, Checking And Adding Coolant Additive
Special Tools And Workshop Equipment Required
Read the cut-off line to obtain an accurate value for the following tests. Place a drop of water on the glass using a pipette to improve the readability of the cut-off line. The cut-off line can be clearly recognized on the "WATERLINE".
-- Check the concentration of the coolant additive using :T10007 (operating instructions).
The refractometer scale -1- applies to coolant additives G 11; G 12; G 12+ and G 12++.
The scale -2- only applies to coolant additive G13.
-- Drain some of the coolant and add coolant additive if the freeze protection if the frost protection is inadequate. Refer to COOLANT LEVEL, CHECKING AND ADDING COOLANT ADDITIVE .
If it cannot clearly determined which coolant additive is in the coolant system, use the scale -2- for coolant additive G13.
Please follow all waste disposal regulations!
-- Check the concentration of the coolant additive again after the road test.