Monitor-ID $35: Exhaust Gas Recirculation
-- Connect the scan tool.
-- Start the engine and run at idle.
-- Select "Diagnostic Mode 06: Check / test the results of components that are not continuously monitored".
Select "Monitor-ID $35".
-- Select the desired "Test-ID".
-- Check specified values at idle.
| Test-ID | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| $80 | P0011 | Target Check Intake Valve | 0.0° | 10.0° | Refer to DTC P0011 in the DTC summary table.Engine Control Module --, 2019 MY - P0011 |
| $81 | P000A | Slow Response Intake Valve | 15.0° | 655.35° | Refer to DTC P000A in the DTC summary table.Engine Control Module --, 2019 MY - P000A |
| $82 | P0014 | Target Check Outlet Valve | 0.0° | 10.0° | Refer to DTC P0014 in the DTC summary table.Engine Control Module --, 2019 MY - P0014 |
| $83 | P000B | Slow Response Outlet Valve | 3.5° | 655.35° | Refer to DTC P000B in the DTC summary table.Engine Control Module --, 2019 MY - P000B |
-- If any of the components or systems fail to meet the specified values, refer to Diagnostic Mode 03: Interrogating Fault Memory to check for stored DTCs or the corresponding diagnostic repair procedure DIAGNOSTIC MODE 03 - READ DTC MEMORY .
-- Switch the ignition off.